Question 1

Can I use this type of adhesive for name tags meant to be applied to clothing?

Accepted Answer

Yes, the Standard White Matte label material is commonly used for adhesive name badge labels.

Question 2

Is there a compatible Avery template for these labels?

Accepted Answer

These labels are the same size and layout as the following Avery templates:

25395, 42395, 45395, 48395, 5095, 5395, 5895, 8395, 85395, 88395, 94211

Question 3

Hello, I am looking for weatherproof, removable, white pollyester sized @ 3.375" x 2.33"
Do you carry them?
Thanks - Shawn

Accepted Answer

Our Weatherproof Polyester for Laser material has a permanent adhesive. Although we do carry a material with a removable adhesive, it is an uncoated paper-based stock and is not weatherproof. Below is a link to the Removable White Matte for your review.

https://www.onlinelabels.com/material_removable_labels.htm

You can also visit the following link if you'd like to request free samples of both materials for testing.

https://www.onlinelabels.com/samples

Question 4

Can you tell me what the actual material make up of these labels are? I am looking to buy the right ink to silk screen on them.

Accepted Answer

The Clear Gloss for Laser (CL) material is a polyester-based material with a laser top coat. We have not tested the material with other types of printing but we do offer free samples. You are welcome to visit the link below to request a few sheets for testing.

https://www.onlinelabels.com/samples

Question 5

Are there perforations between the labels so that separate the labels, keeping the backing on each -- without using a scissor -- after I have printed them?

Accepted Answer

The OL5030 does not have perforations between labels but there is enough space between labels to cut them if needed. If the perforations are required, we can create a custom configuration for you. You can submit a request at the link below or contact Customer Support at 888-575-2235.

https://www.onlinelabels.com/General/CustomSizes.aspx

Question 6

These labels work for the 0.5 oz tubes (like a big size lip balm) - do they have the perforated safety seal on them, or is that not an option? Thanks!

Accepted Answer

For this size, 3.375" x 2.3125", we don't have an option with a safety seal tab. However, we can create custom shapes and sizes. You're welcome to submit a request below or reach out to our Customer Support Team at 888-575-2235.

https://secure.onlinelabels.com/support/SupportRequest.aspx

Question 7

Will these labels stand up to essential oil usage?

Accepted Answer

The OL5030 is available in our weatherproof materials, seen at the link below. Although these are durable and water resistant, the inks or toners used in standard printers may not be oil-resistant so smearing or discoloration may occur with direct oil contact.

https://www.onlinelabels.com/materials/weatherproof-labels

You can try free samples of our standard items here for testing with your application: https://www.onlinelabels.com/samples

Question 8

Do you have any suggestions from preventing bubbles under the label? We are using our labels on glass candle jars.

Accepted Answer

There is a wide range of factors that can contribute to how well a label adheres to the surface it’s being applied to so we’ve included some recommendations below.

-It’s important to ensure that the surface is clean and free of any debris, dust or moisture before attempting to apply your label.

-Applying the center of the label first, and then continuing to apply pressure outward will ensure a nice, even application that should promote better adhesion.

-Be careful when handling the label before application. Oil from your fingers can negatively affect the strength of the adhesive - try to hold the labels by the edge and touch the adhesive as little as possible.

-Remember, our labels are pressure sensitive, so be sure to use some force when applying them to your surface or container.

Question 9

Any tips for air bubbles? After a while the labels develop bubbles and wrinkles even when its completely smooth to start ?

Accepted Answer

We apologize for the adhesive issues you’re experiencing. Our Weatherproof Polyester Laser (LP) has a permanent adhesive that works well on most surfaces. However, there is a wide range of factors that can contribute to how well a label adheres to the surface it’s being applied to so we’ve included some recommendations below.

-It’s important to ensure that the surface is clean and free of any debris, dust or moisture before attempting to apply your label.

-Applying the center of the label first, and then continuing to apply pressure outward will ensure a nice, even application that should promote better adhesion.

-Be careful when handling the label before application. Oil from your fingers can negatively affect the strength of the adhesive - try to hold the labels by the edge and touch the adhesive as little as possible.

-Remember, our labels are pressure sensitive, so be sure to use some force when applying them to your surface or container.

If you’ve followed the suggestions listed above and are still experiencing issues please feel free to send us a support ticket at the link below with details on the surface and method of application. One of our Customer Support Representatives will be happy to assist you.

https://secure.onlinelabels.com/Support/SupportRequest.aspx

Question 10

Is this adhesive safe for clothing?

Accepted Answer

Our Standard White Matte (WX) is more commonly used for name badges and clothing labels since the Removable White Matte (WR) has a lower tack adhesive that doesn't bond as well to fibrous or textured surfaces. If the clothing is not delicate, our Aggressive White Matte (AT) may be a better option.

Below is a link if you'd like to request samples for testing.

https://www.onlinelabels.com/samples