Are these weatherproof labels polyester based?

The Weatherproof Thermal Transfer (TW) material is a BOPP plastic rather than polyester-based. If you'd like to test this material with your printer and application, you're welcome to request free samples at the link below. https://www.onlinelabels.com/samples

Can I get RL2056DW without perforations between labels?

We would be able to produce the RL2056TW labels without perforations, however this would be treated as a custom item. Custom configurations can be requested by contacting our customer support team. We can be reached at 888-575-2235 or by submitting a support ticket at the link below. https://secure.onlinelabels.com/Support/SupportRequest.aspx

Can I get a list of compatible printers (mfg part numbers) for RL2056TW?

The RL2056TW is a 1.5" x 0.5" weatherproof thermal transfer label on a 1" core with a 4" outer diameter. We've tested this product with Zebra thermal transfer printer models that specify compatibility with 1" cores.

I'm trying these as a replacement for the Zebra labels of the same size due to adhesive failures. How do I select the right ribbon size? the Zebra ribbon of 6200 Resin is 2.52" by 244ft. Will the 2.36" by 984ft, TR3653 work?

We would recommend checking your Zebra model's specifications to confirm the ribbon requirements. Most models list a minimum and maximum for ribbon width and length. You're welcome to reach out to us directly as well with the printer model number so we can assist in locating these details. Our Customer Support Team can be reached at 1-888-575-2235 or by submitting a support ticket at the link below. https://secure.onlinelabels.com/support/SupportRequest.aspx

Can these labels be used in a -80 freezer

Our Weatherproof Thermal Transfer (TW) is a film-based material that can be used for dry and wet applications. The recommended surface temperature for application is -10°F. Once applied, it can withstand -65°F to +147°F.

What printer would I need to use these labels. It will be very low volume so nothing that is going to break the bank

The RL2056TW has been tested to be compatible with Zebra's thermal transfer printer models that can take a 1" core and hold a roll with an outer diameter of 4". Please note that this product is not compatible with DYMO or Brother brand printers. You can review the product specifications on the product page but I have also listed this information below. Product Specifications for RL2056TW Dimensions: 1.5" x 0.5" Gap: 0.125" Corner Radius: 0.125" Carrier Width: 1.625" Core Diameter: 1" Wind: Face Out Outer Diameter: 4" Perforations: Yes (Between labels) Labels per Roll: 2,480 *Please note: these labels are not compatible with DYMO® and Brother™ printers.