How "bright" or "white" are the OL813WX labels? Do you have a brightness rating for them? I have a rather dark, very high detail image to print on legal sized labels. I have found that I need an extremely white paper type to get the results that look best for the image. Most shipping labels I have tried tend to be on the grey spectrum of color when compared to bright white inkjet paper. This grey shift in color has given my image poor results. I will need at least 500 sheets for my current project. Would it possible to get one or two sheets to try/compare before I place an order? Thanks Patrick

Our Standard White Matte (WX) material has a brightness percentage of 93.5% with an opacity percentage of 89%. We would be happy to send you some sample sheets free of charge if you would like to do test printing prior to placing a larger order. To request samples, please use our sample request form below: https://www.onlinelabels.com/samples

These labels are not sticky at all, how do I get them to stick to glass?

We apologize for the adhesive issues you’re experiencing. The Standard White Matte (WX) has a permanent adhesive that works well on most surfaces. However, there is a wide range of factors that can contribute to how well a label adheres to the surface it’s being applied to so I have included some recommendations below. -It’s important to ensure that the surface is clean and free of any debris, dust or moisture before attempting to apply your label. -Applying the center of the label first, and then continuing to apply pressure outward will ensure a nice, even application that should promote better adhesion. -Be careful when handling the label before application. Oil from your fingers can negatively affect the strength of the adhesive - try to hold the labels by the edge and touch the adhesive as little as possible. -Remember, our labels are pressure sensitive, so be sure to use some force when applying them to your surface or container. If you’ve followed the suggestions listed above and are still experiencing issues please feel free to send us a support ticket at the link below with details on the surface and method of application. One of our Customer Support Representatives will be happy to assist you. https://secure.onlinelabels.com/Support/SupportRequest.aspx