Question 1

Was wondering if this small candy wrapper came in a navy shiney material have the true blue and is too dull

Accepted Answer

I apologize but we do not carry a blue glossy label stock. You can print a navy blue background color on the white gloss material to achieve this. You are welcome to request samples if you would like to test the white gloss materials before placing an order. Below is a link to our free sample request page.

https://www.onlinelabels.com/samples

Question 2

How rounded are the corners for this item? I've looked at the pre-designed templates and some show the corners almost square (which I like) and others very rounded.  I like the square corner 2.5" x 1.5" labels but since they're only available as a custom order (minimum 100 sheets), I'm looking for a similar alternative.

Accepted Answer

The corner radius for the OL800 rounded corner rectangles is 0.0625" (1/16"). This information can also be found on under Product Specifications on the product page, just below the "Add to Cart" button.

Question 3

Can you write on these labels with a pen?

Accepted Answer

Below is a link to a list of our materials and the compatible writing utensils. For the Weatherproof Polyester Laser (LP), this is intended for laser printing, however we were able to successfully test the material with permanent markers and pens.

https://www.onlinelabels.com/support/faq/118?categoryId=15

Question 4

How well do these stick?  Will they stick to polypropylene plastic bags?

Accepted Answer

The Light Tan (TC) features a standard permanent adhesive that works well on most surfaces. You're welcome to request samples at the following link to test this with your plastic bags: https://www.onlinelabels.com/samples.

There is a wide range of factors that can contribute to how well a label adheres to the surface it’s being applied to so we’ve included some recommendations for you to follow while testing the sample sheets.

-It’s important to ensure that the surface is clean and free of any debris, dust or moisture before attempting to apply your label.

-Applying the center of the label first, and then continuing to apply pressure outward will ensure a nice, even application that should promote better adhesion.

-Be careful when handling the label before application. Oil from your fingers can negatively affect the strength of the adhesive - try to hold the labels by the edge and touch the adhesive as little as possible.

-Remember, our labels are pressure sensitive, so be sure to use some force when applying them to your surface or container.

Question 5

I want to use these as meat labels for freezer meat and I'm placing them onto paper wrapped meat. Can I write on these labels with a sharpie marker without it smearing or beading up?

Accepted Answer

The Weatherproof Polyester Laser (LP) works best in a laser printer, but some writing utensils may be used as well. Below is a link to a list of our materials and compatible writing utensils.

https://www.onlinelabels.com/support/faq/118?categoryId=15

You also can visit the link below to request free sample sheets for testing.

https://www.onlinelabels.com/samples

Question 6

Will the material withstand heat well if it were used as a candle label?

Accepted Answer

The White Gloss Laser (WS) can be used in various applications, including candles. The recommended surface temperature for application is +25° F, but once applied this material can withstand -75° F to +200° F.

For commonly used candle label sizes, you can visit the link below.

https://www.onlinelabels.com/uses/candle-labels

Question 7

Can you tell me the printer settings for this.  I have an Eco Tank 2760

Accepted Answer

When printing on clear film material like Clear Gloss Inkjet, it's best to adjust your printer's paper-type setting to either Photo Glossy or Presentation. Since this label stock is film-based, keep the print quality at standard/normal to avoid over-saturating the material.

Question 8

Is there a label for mylar bags

Accepted Answer

We provide a variety of materials that are compatible with many surfaces. You are welcome to visit the link below to request free samples for testing with your mylar bag application. When applying labels to the bags, we recommend doing so while the bag is empty and lying on a hard, flat surface.

https://www.onlinelabels.com/samples

Question 9

Are any of your stickers recyclable or compostable?
Are you able to recycle your 100% recycled stickers after use? Thank you.

Accepted Answer

Due to the acrylic-based adhesive on the materials, including the 100% Recycled White (RX), they would not be considered recyclable or compostable. However, I will be happy to forward your request for a recyclable material to our Product Development Team for future consideration.

Question 10

what is the avery template I would use in WORD?

Accepted Answer

The OL800 is not the same configuration as an existing Avery item. However, we do offer templates at the link below which includes a Microsoft Word template. Depending on your version of Microsoft Word, this may also be pre-loaded when choosing OnlineLabels.com in the label vendors drop down menu.

https://www.onlinelabels.com/templates/blank/ol800