Question 1

Are these the type of labels that wrap around a napkin and then adhere to itself on the ends?  Or is the adhesive on the entire back of the label?

Accepted Answer

Our sheet labels have full coverage adhesive on the backside. The only products that have partial adhesive would be our Cigar Labels which only have adhesive at one end. I have included a link below to these products for you to review since they are close in size to the OL1115. I have also provided a link to our Sample Request page if you'd like to test these with your application.

https://www.onlinelabels.com/cigar-labels.htm

https://www.onlinelabels.com/samples

Question 2

What is the Word Product number for this label size?

Accepted Answer

Depending on your version of Microsoft Word, the OL1115 may be pre-loaded under Label Vendor: OnlineLabels.com. If you're not able to locate it, you can visit the link below to the template options to download the MS Word template.

https://www.onlinelabels.com/templates/blank/ol1115

Question 3

Would these labels be durable for year round outside use?

Accepted Answer

The Weatherproof Gloss for Inkjet is a very durable and water resistant material so it can be used with most outdoor applications. The inks from your inkjet printer are not likely to be UV resistant however, so exposure to direct sunlight for an extended period of time could cause the colors to fade. For best results, adjust the material type setting in your printer options to a Photo or Glossy setting. You may also want to consider a UV resistant spray which can help minimize fading.

You are welcome to visit the link below to request free samples of this material for testing.

https://www.onlinelabels.com/samples

Question 4

are these peelable labels?

Accepted Answer

Yes, the OL1115 has 18 3" x 1" peelable labels. You are welcome to request free samples by visiting the link below.

https://www.onlinelabels.com/samples

Question 5

Will this cover previous printing without show through?

Accepted Answer

To cover up an existing label, we recommend our Blockout for Laser (BT) material. This has an opaque gray backing designed to block text and images that it is placed over.

You're welcome to visit the link below to request a few sheets of both of these materials to test with your application.

https://www.onlinelabels.com/samples

Question 6

Since our products are FDA regulated, we need to capture all pertinent details of components of the products, packaging, etc. can you provide a little more detail on the label type/materials used?

Accepted Answer

Our Weatherproof Polyester Laser (LP) material is a white polyester film with a high-performance topcoat designed for laser printing. You can review more material details on the material page here: https://www.onlinelabels.com/materials/polyester-laser-labels.

Question 7

what is paper weight gs/m

Accepted Answer

The OL1115 is available in a variety of materials. You can view the material specifications on the product page by clicking Details once the desired material is selected.

If you'd like to try samples of these materials, you're welcome to visit the link below.

https://www.onlinelabels.com/samples

Question 8

We need aggressive adhesive. The labels will be on personal  electronics, ie laptops. Does this label have sufficient tack and longevity?

Accepted Answer

Our Clear Gloss Laser features a permanent adhesive that works well on a variety of surfaces. If you'd like to request samples for testing on your application, you're welcome to visit the link below.

https://www.onlinelabels.com/samples

Question 9

Do these labels meet the requirements for MIL-DTL-19834

Accepted Answer

Our Silver Foil for Laser is a metalized paper with a permanent adhesive. It has not been confirmed to meet the requirements for MIL-DTL-19834 so I have included the material specifications below as well as a link to request free samples of the product.

Facestock Weight: 77# ± 10%
Facestock Caliper: 3.5 mil ± 10%
Liner Weight: 50# ± 10%
Liner Caliper: 3.5 mil ± 10%
Total Caliper: 7.5 mil ± 10%
Min. Application Temperature: +40° F
Once applied, will withstand: -65° F to +200° F temperatures

https://www.onlinelabels.com/samples

Question 10

Does this label have a gloss finish?

Accepted Answer

The OL1115LP (Weatherproof Polyester Labels for Laser Printer) have a slight sheen to them. I would not consider them to be glossy, but they are slightly shinier than our matte finish products. You can see a video of the product at https://www.onlinelabels.com/videos/weatherproof-polyester-laser-lp.htm if you want to get a better idea of what the product looks like. You are also welcome to request a few sample sheets for testing at https://www.onlinelabels.com/samples if would like to try the product before making a purchase.