Material Overview Print Settings Video Tutorials General Tips Troubleshooting

Printing information for OL114WG

Material Overview

OnlineLabels offers a wide selection of materials.Our gloss inkjet label material is a bright white glossy material with a standard permanent adhesive. The material produces photo quality results when printed with a standard inkjet printer. The gloss inkjet material has a 60 lb. facestock and a 50 lb. liner. It also has a thickness of 0.0077 inches +/- 10%.

Print Settings

  • Our gloss material is heavier than a standard sheet of paper. When printing the material, we suggest changing your material settings to “Gloss." This may assist in a smoother run and avoid common printing issues.
  • The gloss for inkjet material should only be printed with an inkjet printer.

Video Tutorials

White gloss inkjet label (WG) material

This material has a high gloss finish that provides and upscale clean finished look. The WG material works great in inkjet printers. (Play Video)

Determine if you have a laser printer or inkjet printer

(Play Video)

Tips related to White Gloss for Inkjet Material

  • Store inkjet label sheets in the original plastic clamshell packaging in a cool, dry place to avoid humidity. Storing label sheets in the printing environment for a short period before attempting to print, allows them to adjust to any temperature changes and stabilize after shipping, which may prevent common printing problems.
  • Store your inkjet labels away from fumes and other odors, as it will absorb these properties- resulting in the label changing colors.
  • Prevent label sheets from being exposed to direct sunlight or flood lights.
  • Before you print onto a label sheet, first print onto a blank piece of paper. Place the sheet in front of the label sheet, and then hold the sheets up to a light to make sure the positioning is correct.
  • Before and after printing, handle label sheets by the edges of the sheet being careful not to get oil from your fingers on the printable label surface. Oil may cause smudging.
  • Allow label to dry completely before stacking, handling or peeling the printed labels.
  • Sheets of gloss inkjet labels can be passed through the printer only once. Numerous runs through the printer will cause the label to jam or peel off.
  • We do not recommend printing your gloss inkjet label in a photocopier or laser printer, as there is a higher chance of jamming.

Troubleshooting Issues Related to White Gloss for Inkjet Material

  • If your gloss inkjet labels are suffering from a smudge/faint effect in an inkjet printer, try reducing your DPI printer quality setting.

Troubleshooting Issues Related to OL114WG

  • If you are experiencing alignment issues when printing with Maestro Label Designer or a PDF, verify the page scaling is set to none and un-check the “auto rotate and center” option in print settings. It may also be labeled as “Resize Page to Fit Printer Margins.”
  • If you are experiencing additional alignment issues when using Maestro Label Designer or other software, please refer to our Printer Alignment Guide.