Favorites

To:
From:
Note:	Leave a note (optional)

• 
  Shop By:

  Size	Material & Color	Category

  	Office Brand Cross-Reference Chart
  Custom Label Sizes	Size Search Tool
  Overstock Sale Items	Large Format Label Sheets (NEW)
  Recently Viewed Products	Roll Labels (NEW)

• 

  	Blank Label Templates
  	Pre-Designed Label Templates
  	Label Software Reviews

• 

View Cart

Printing information for OL9325CK

Material Overview

Our clear gloss label sheet for inkjet printing is a transparent polyester material with permanent adhesive. Standard inkjet printer ink will encapsulate into the specially formulated top-coating on this material. Once printed, the ink will not smear or smudged when touched. The material has a 40 lb. facestock and a 56 lb. liner. The label sheet has a thickness of 0.0062 inches +/- 10%.

Print Settings

• Our clear gloss material is heavier than a standard sheet of paper. When printing the material, we suggest changing your material settings to “Gloss." This may assist in a smoother run and avoid common printing issues.
• This material should only be printed with an inkjet printer.

Tips related to Clear Gloss for Inkjet Material

• Store inkjet label sheets in the original plastic clamshell packaging in a cool, dry place to avoid humidity. Storing label sheets in the priniting environment for a short period before attempting to print, allows them to adjust to any temperature changes and stabilize after shipping, which may prevent common printing problems.
• Store your inkjet labels away from fumes and other odors, as it will absorb these properties- resulting in the label changing color.
• Prevent label sheets from being exposed to direct sunlight or flood lights.
• Before you print onto a label sheet, first print onto a blank piece of paper. Place the sheet in front of the label sheet, and then hold the sheets up to a light to make sure the positioning is correct.
• Before and after printing, handle label sheets by the edges of the sheet being careful not to get oil from your fingers on the printable label surface. Oil may cause smudging.
• Allow label to dry completely before stacking, handling or peeling the printed labels.
• Sheets of clear gloss labels can be passed through the printer only once. Numerous runs through the printer can cause the label to jam or peel off.
• We do not recommend printing your clear gloss inkjet label in a photocopier or laser printer, as there is a higher chance of jamming.

Tips for Printing Item OL9325CK

• Please note, when printing circular/round labels in Microsoft Word, the label template will appear square. This is a default setting of Microsoft Word and will not affect your printing.

Troubleshooting Issues Related to Clear Gloss for Inkjet Material

• If your clear gloss inkjet labels are suffering from a smudge/faint effect in an inkjet printer, try reducing your printer’s DPI.

Troubleshooting Issues Related to OL9325CK

• If you are experiencing alignment issues when printing with Maestro Label Designer or a PDF, verify the page scaling is set to none and un-check the “auto rotate and center” option in print settings. It may also be labeled as “Resize Page to Fit Printer Margins.”
• If you are experiencing additional alignment issues when using Maestro Label Designer or other software, please refer to our Printer Alignment Guide.