Favorites

To:
From:
Note:	Leave a note (optional)

• 
  Shop By:

  Size	Material & Color	Category

  	Office Brand Cross-Reference Chart
  Custom Label Sizes	Size Search Tool
  Overstock Sale Items	Large Format Label Sheets (NEW)
  Recently Viewed Products	Roll Labels (NEW)

• 

  	Blank Label Templates
  	Pre-Designed Label Templates
  	Label Software Reviews

• 

View Cart

Printing information for OL400LP

Material Overview

Our weatherproof laser label sheets are made from a durable polyester material. The polyester material does not easily tear and performs well in a wide range of temperatures. The material has a 56 lb. liner and a thickness of 0.007 inches +/- 10%.

Print Settings

• For best results when printing your weatherproof polyester material, use the manual by-pass tray located on your printer.
• When printing the weatherproof polyester material, select the "Labels" material type within your printer settings.
• This material should only be printed with a laser printer.

Tips related to Weatherproof Polyester for Laser Material

• IMPORTANT: Store label sheets in the original plastic clamshell packaging in a cool, dry place to avoid humidity. Storing label sheets in the printing environment for a up to 24 hours before using them, allows them to adjust to any temperature changes and stabilize after shipping, which may prevent common printing problems.
• Prevent label sheets from being exposed to direct sunlight or flood lights.
• Before you print onto a label sheet, first print onto a blank piece of paper. Place the sheet in front of the label sheet, and then hold the sheets up to a light to make sure the positioning is correct.
• Before and after printing, handle label sheets by the edges of the sheet being careful not to get oil from your fingers on the printable label surface. Oil may cause smudging or smearing.
• Allow label to dry completely before stacking, handling or peeling the printed labels.
• Sheets of weatherproof polyester labels can be passed through the printer only once. Numerous runs through the printer will result in jamming or peeling.
• We do not recommend printing your weatherproof polyester label in a photocopier or inkjet printer, as there is a higher chance of jamming.

Troubleshooting Issues Related to Weatherproof Polyester for Laser Material

• If your weatherproof polyester labels are suffering from a smudging effect or a faint print in a laser printer, try adjusting your print settings to “Glossy” to help avoid this problem.
• If you experience any jamming issues, please contact a customer service representative at 888-575-2235.

Troubleshooting Issues Related to OL400LP

• If you are experiencing alignment issues when printing with Maestro Label Designer or a PDF, verify the page scaling is set to none and un-check the “auto rotate and center” option in print settings. It may also be labeled as “Resize Page to Fit Printer Margins.”
• If you are experiencing additional alignment issues when using Maestro Label Designer or other software, please refer to our Printer Alignment Guide.