Favorites

To:
From:
Note:	Leave a note (optional)

• 
  Shop By:

  Size	Material & Color	Category

  	Office Brand Cross-Reference Chart
  Custom Label Sizes	Size Search Tool
  Overstock Sale Items	Large Format Label Sheets (NEW)
  Recently Viewed Products	Roll Labels (NEW)

• 

  	Blank Label Templates
  	Pre-Designed Label Templates
  	Label Software Reviews

• 

View Cart

Printing information for OL3078WS

Material Overview

Our gloss laser label material is a bright white glossy material with a standard permanent adhesive. The material has a 60 lb. facestock and a 51 lb. liner. The white gloss has a thickness of 0.0072 inches +/- 10%.

Print Settings

• Our gloss material is heavier than a standard sheet of paper. When printing the material, we suggest changing your material settings to “Gloss." This may assist in a smoother run and avoid common printing issues.
• The gloss for laser material should only be printed with a laser printer.

Tips related to White Gloss for Laser Material

• Store laser label sheets in the original plastic clamshell packaging in a cool, dry place to avoid humidity. Storing label sheets in the printing environment for a short period before attempting to print, allows them to adjust to any temperature changes and stabilize after shipping, which may prevent common printing problems.
• Prevent label sheets from being exposed to direct sunlight or flood lights.
• Before you print onto a label sheet, first print onto a blank piece of paper. Place the sheet in front of the label sheet, and then hold the sheets up to a light to make sure the positioning is correct.
• Before and after printing, handle label sheets by the edges of the sheet being careful not to get oil from your fingers on the printable label surface. Oil may cause smudging.
• Allow label to dry completely before stacking, handling or peeling the printed labels.
• Sheets of gloss laser labels can be passed through the printer only once. Numerous runs can cause the label sheet to curl as it passes through the printer, which results in jamming or peeling.
• We do not recommend printing your gloss laser labels in a photocopier or inkjet printer, as there is a higher chance of jamming.

Troubleshooting Issues Related to White Gloss for Laser Material

• If you are still experiencing smudging on the “Gloss” material type in a laser printer, you may want to try using the “Labels” or “Heavy” material type.

Troubleshooting Issues Related to OL3078WS

• If you are experiencing alignment issues when printing with Maestro Label Designer or a PDF, verify the page scaling is set to none and un-check the “auto rotate and center” option in print settings. It may also be labeled as “Resize Page to Fit Printer Margins.”
• If you are experiencing additional alignment issues when using Maestro Label Designer or other software, please refer to our Printer Alignment Guide.